S10 Datasheet, PDF (1/2 Pages) Tyco Electronics – 10 to 500 MHz THIN FILM SPST SWITCH

S10
10 to 500 MHz
Thin Film SPST Switch
Rev. 03/02
• LOW INSERTION LOSS: < 2.5 dB (TYP.)
• HIGH ON/OFF RATION: 60 dB (TYP.)
• LOW VSWR: 1.6:1 (TYP.)
• TTL COMPATABLE
Specifications (Rev. Date: 03/02)*
Characteristics
Typical
Insertion Loss (max.)
10-100 MHz
100-300 MHz
300-500 MHz
Isolation
10-100 MHz
100-300 MHz
300-500 MHz
VSWR Input/Output (max.) in ON state
10-500 MHz
Switching Speed (10-90%)
DC Current (max.) at ±0.7 V
*Measured in a 50-ohm system.
< 1. 7 dB
< 2.0 dB
< 2.5 dB
> 67 dB
> 62 dB
> 48 dB
1.9:1
2 ns
±20 mA
Guaranteed
0° to 50°C -54° to +85°C
2.3 dB
2.6 dB
4.0 dB
2.7 dB
3.0 dB
4.5 dB
54 dB
50 dB
39 dB
52 dB
48 dB
36 dB
2.4:1
5ns
2.6:1
6 ns
Absolute Maximum Ratings
Ambient Operating Temperature
Storage Temperature
Max. Case Temperature
Max. DC Voltage
Max. Continuous RF Input Power
Max. Short Term RF Input Power
Max. Peak Power (1 minute max.)
“S” Series Burn-in Temperature (Case)
-54° to +125°C
-62°C to +125°C
125°C
+6 Volts
+10 dBm
100 mW
1W
125°C
Switching Conditions
ON State Off State
+20 mA
-20 mA
≈ +0.7 V ≈ -0.7 V
Outline Drawings
Package
TO-8
Figure
BD
Model
S10
Schematic Diagram
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology
Solutions is considering for development. Performance is based on target specifications,
simulated results, and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications
are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be
available. Commitment to produce in volume is not guaranteed.
• North America Tel: [phone] • Europe Tel: [phone]
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.