English
Language : 

PAW1027_15 Datasheet, PDF (1/1 Pages) M/A-COM Technology Solutions, Inc. – RF Linear Hybrid Amplifier
PAW1027
RF Linear Hybrid Amplifier
35 to 350 MHz
Features
• ULTRA HIGH LINEARITY
• HIGH GAIN: 38.5 dB (TYP.)
• LOW NOISE FIGURE 3.7 dB (TYP.)
• OPERATION OVER A WIDE VOLTAGE RANGE
Description
The PAW1027 linear power amplifier is a discrete hybrid
design, which uses thick film solder manufacturing
processes for accurate performance and high reliability.
The design has 2 gain stages, using a push pull cascode circuit
configuration. Performance is very linear over a broadband
frequency range, making it particularly suited for CATV, and
commercial & military radio applications.
Product Image
Rev. V3
Ordering Information
Part Number
PAW1027
Package
SOT115J
Absolute Maximum Ratings
Parameter
Absolute
Maximum
Electrical Specifications: Z0 = 50Ω, VCC = +24 VDC
Storage Temperature
Operation Base Temperature
-40ºC to +85ºC
+70ºC
Parameter
Units
Typical
25ºC
Guaranteed
0oC to +70oC
RF Input Voltage
DC Voltage
+14 dBm
+28 volts
Frequency
Power Gain (Min/Max)
MHz
dB
35-350
38.5
35-350
37.0 / 40.0
Outline Drawing: SOT115J *
Gain Flatness (max)
f = 40 to 350 MHz
dB
Input / Output Return Loss (min)
f = 50 to 350 MHz
dB
Composite Triple Beat (CTB)
60 channels flat Vout = +46 dBmV
dB
Cross Modulation (XMOD)
60 channels flat Vout = +46 dBmV
dB
Second Order IMD
2 tone Vout = +46 dBmV
dB
f1 = 50 MHz, f2 = 350 MHz
Noise Figure (max)
f = 350 MHz
dB
Total Current (max)
mA
0.4
18.0
-59.0
-59.0
-64.0
3.7
300
0.6
14.0
5.0
340
.158
.315
1.760
1.5+.01
M/A-COM
Ø .179+.031
.555
Pin #
1……….…….Input
2,3,5,6……Ground
4………….……+V
7……….…..Output
.170 MODEL NO.
DATE CODE
1.00
1.05
IF NEEDED, DETERMINED AT TEST / TUNE
.165
123 4 567
.800+.010
.500
+.010
.100 TYP
EXCEPT AS SHOWN
.300
.500
.018+.002
.100+.02
.100+.005
∗ Dimensions are inches ±0.015 unless otherwise specified.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.