PAW1027-1 Datasheet, PDF (1/1 Pages) Tyco Electronics – RF Linear Hybrid Amplifier 35 to 500 MHz

PAW1027-1
RF Linear Hybrid Amplifier
35 to 500 MHz
Features
• ULTRA HIGH LINEARITY
• HIGH GAIN: 38.0 dB (TYP.)
• LOW NOISE FIGURE 4.5 dB (TYP.)
• OPERATION OVER A WIDE VOLTAGE RANGE
Description
The PAW1027-1 linear power amplifier is a discrete hybrid
design, which uses thick film solder manufacturing
processes for accurate performance and high reliability.
The design has 2 gain stages, using a push pull cascode circuit
configuration. Performance is very linear over a broadband
frequency range, making it particularly suited for CATV, and
commercial & military radio applications.
Product Image
Rev. V3 Preliminary
Ordering Information
Part Number
PAW1027-1
Package
SOT115J
Absolute Maximum Ratings
Parameter
Absolute
Maximum
Electrical Specifications: Z₀ = 50Ω, V_CC = +24 V_DC
Storage Temperature
Operation Base Temperature
-40ºC to +85ºC
+70ºC
Parameter
Typical Guaranteed
Units
25ºC -40^oC to +70^oC
RF Input Power
DC Voltage
+14 dBm
+28 volts
Frequency
Power Gain (Min/Max)
MHz 35-500
dB
38.0
35-500
36.0 / 40.0
Outline Drawing: SOT115J ^*
Gain Flatness (max)
f = 40 to 500 MHz
dB
0.5
1.0
Input / Output Return Loss (min)
f = 50 to 500 MHz
dB
16.0
12.0
Composite Triple Beat (CTB)
60 channels flat V_out = +46 dBmV
dB
-59.0
Cross Modulation (XMOD)
60 channels flat V_out = +46 dBmV
dB
-59.0
Second Order IMD
2 tone V_out = +46 dBmV
f₁ = 50 MHz, f₂ = 500 MHz
dB
-64.0
Noise Figure (max)
f = 500 MHz
dB
4.2
6.0
Total Current (max)
mA
300
350
.158
.315
1.760
1.5+.01
M/A-COM
Ø .179+.031
.555
Pin #
1……….…….Input
2,3,5,6……Ground
4………….……+V
7……….…..Output
.170 MODEL NO.
DATE CODE
1.00
1.05
IF NEEDED, DETERMINED AT TEST / TUNE
.165
123 4 567
.800+.010
.500
+.010
.100 TYP
EXCEPT AS SHOWN
.300
.500
.018+.002
.100+.02
.100+.005
∗ Dimensions are inches ±0.015 unless otherwise specified.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.