English
Language : 

PA511-SMPA511 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier
PA511 / SMPA511
Cascadable Amplifier
10 to 500 MHz
Rev. V2
Features
• HIGH POWER OUTPUT +24.8 dBm (TYP.)
• HIGH THIRD ORDER IP3 +40 dBm (TYP.)
• MODERATE NOISE FIGURE 4.6 dB (TYP.)
Product Image
Description
The PA511 RF amplifier is a discrete thin film hybrid design,
which incorporates the use of thin film manufacturing processes
for accurate performance and high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. An active DC biasing network is used for temperature-
stable performance, in addition to an RF Choke, used for power
supply decoupling.
Both TO-8 and Surface Mount packages are hermetically sealed,
and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
PA511
SMPA511
MAAP-008739-CPA511
Package
TO-8
Surface Mount
SMA Connectorized **
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
IP2
Units
MHz
dB
dB
dB
dB
dBm
dBm
dBm
Typical
25ºC
5-600
12.7
±0.4
17
4.6
24.8
+40
+55
Guaranteed
0º to 50ºC -54º to +85ºC*
10-500
10-500
11.5
11.0
±0.5
±0.8
5.0
5.5
23.5
23.0
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +150ºC
Case Temperature
85ºC
DC Voltage
+17 V
Continuous Input Power
+17 dBm
Short Term Input power
(1 minute max.)
100 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
85ºC
Thermal Data: VCC = +15 VDC
Parameter
Rating
Second Order Harmonic IP dBm
+60
VSWR Input / Output (max)
1.3:1 / 1.4:1 1.8:1 / 1.8:1
DC Current @ 15 Volts (max) mA
118
120
2.0:1 / 2.1:1
122
Thermal Resistance θjc
Transistor Power Dissipation Pd
Junction Temperature Rise
Above Case Tjc
ºC/W
W
ºC
* Over temperature performance limits for part number CPA511, guaranteed from 0oC to +50oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.