PA2010-SMPA2010 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier

PA2010 / SMPA2010
Cascadable Amplifier
200 to 2000 MHz
Features
• HIGH OUTPUT POWER: +25.5 dBm (TYP.)
• HIGH THIRD ORDER IP³: +33 dBm (TYP.)
• MODERATE NOISE FIGURE: 5.0 dBm (TYP.)
• LOW VSWR: 1.5:1 (TYP.)
Description
The PA2010 power amplifier is a discrete hybrid design, which
uses thin film manufacturing processes for accurate
performance and high reliability.
This single stage GaAs FET feedback amplifier design
displays impressive performance characteristics over a
broadband frequency range.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is avail-
able.
Ordering Information
Product Image
Part Number
PA2010
SMPA2010
MAAP-008326-CP2010
Package
TO-8
Surface Mount
SMA Connectorized **
** The connectorized version is not RoHs compliant.
Rev. V2
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
Units
Typical
25ºC
GHz
0.2-2.4
dB
10.0
dB
±0.3
dB
20
dB
5.5
dBm
25.5
Guaranteed
0º to 50ºC -54º to +85ºC*
0.2-2.0
0.2-2.0
9.0
8.5
±0.7
±1.0
6.5
7.0
23.5
23.0
Parameter
Absolute
Maximum
Storage Temperature
Case Temperature
-62ºC to +150ºC
+85ºC
DC Voltage
Continuous Input Power
Short Term Input power
(1 minute max.)
+17 V
+17 dBm
100 mW
Peak Power (3 µsec max.)
“S” Series Burn-In
Temperature (case)
0.5 W
+85ºC
IP3
dBm
+33
IP2
dBm
+50
Thermal Data: V_CC = +15 V_DC
Parameter
Rating
Second Order Harmonic IP dBm
+55
Thermal Resistance θ_jc
50ºC/W
VSWR Input / Output (max)
1.8:1 / 1.5:1 1.9:1 / 1.7:1
DC Current @ 15 Volts (max) mA
179
187
2.0:1 / 1.8:1
189
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
1.25 W
+63ºC
* Over temperature performance limits for part number CPA2010, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.