PA2003 Datasheet, PDF (1/2 Pages) Tyco Electronics – Ultra Linear Driver Amplifier 1800 to 2000 MHz

PA2003
Ultra Linear Driver Amplifier
1800 to 2000 MHz
Features
• LOW NOISE FIGURE: 2.7 dB (TYP.)
• GAIN: 21 dB (TYP.)
• HIGH P1dB: +32.5 dBm (TYP.)
• HIGH IP³: +46 dBm (TYP.)
• BROADBAND RESPONSE: 1.5 GHz TO 2.2 GHz (TYP.)
Description
The PA2003 is a discrete hybrid design, which uses thick film
solder manufacturing processes for accurate performance and high
reliability.
This 2 stage GaAS FET transistor design uses feedback loops for
flat broadband linear performance, with low noise figure.
The model is particularly suited for power driver applications used
in the base station & repeater infrastructure, and for commercial &
military radios.
Product Image
Rev. V4
Ordering Information
Part Number
PA2003
Package
Flange Mount Carrier
Electrical Specifications: Z₀ = 50Ω, V_CC = +12 V_DC Absolute Maximum Ratings
Parameter
Units
Typical
25ºC
Gurarnteed
0ºC to +70ºC
Parameter
Absolute
Maximum
Frequency
Small Signal Gain (min)
MHz
dB
1800-2000
21.3
1800-2000
19.0
Storage Temperature
Operation Base Temperature
-40ºC to +85ºC
+70ºC
Gain Flatness (max)
dB
+ 0.25
+ 0.5
Max. DC Voltage
+15 Vdc
Noise Figure (max)
dB
2.7
3.3
Max. Continuous RF Input Power
+15 dBm
Reverse Isolation
dB
37.0
Power Output
@ 1.0 dB Comp. (min.)
Output IP³
dBm
dBm
+32.5
+46.0
VSWR Input / Output (max.)
1.6:1 / 1.8:1
+31.5
2.0:1 / 2.0:1
Thermal Data: V_CC = +12 V_DC
Parameter
Rating
Thermal Resistance θ_jc
22ºC/W
DC Current
@ +12 Volts (max.)
mA
495
520
Junction Temperature Rise Above Case T_jc
51ºC
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.