PA1162 Datasheet, PDF (1/2 Pages) Tyco Electronics – 800-960 MHz(4 Watt Ultra Linear Power Amplifier)

PA1162
RF Linear Hybrid Power Amplifier - 4 Watts
800 to 960 MHz
Features
• LOW NOISE FIGURE: 2.0 dB (TYP.)
• HIGH GAIN: 28 dB (TYP.)
• HIGH P1dB: +35.5 dBm (TYP.)
• HIGH IP³: +50 dBm (TYP.)
Description
The PA1162 is a discrete hybrid linear power amplifier design,
which uses thick film solder manufacturing processes for accurate
performance and high reliability.
This 2 stage GaAs FET transistor design uses feedback loops for
flat broadband linear performance, with very low noise figure.
The model is particularly suited for power driver applications used
in the base station & repeater infrastructure, and for commercial &
military radios, where ultra high linearity is critical.
Product Image
Rev. V4
Ordering Information
Part Number
PA1162
Package
Flange Mount Carrier
Electrical Specifications: Z₀ = 50Ω, V_CC = +12 V_DC Absolute Maximum Ratings
Parameter
Units
Frequency
MHz
Small Signal Gain (min)
dB
Typical
25ºC
800-960
28.0
Gurarnteed
0ºC to +70ºC
800-960
26.0
Gain Flatness (max)
dB
Noise Figure (max)
dB
+ 0.5
2.0
+ 1.0
3.5
Parameter
Storage Temperature
Operation Base Temperature
Max. DC VOltage
Max. Continuous RF Input Power
Absolute
Maximum
-40ºC to +85ºC
+70ºC
+13 Vdc
+15 dBm
Power Output
@ 1.0 dB Comp. (min.)
Output IP³
dBm
dBm
+35.5
+50.0
+34.0
Thermal Data: V_CC = +12 V_DC
Parameter
Rating
VSWR Input / Output (max.)
DC Current
@ +12 Volts (max.)
mA
2.0:1
825
2.3:1
900
Thermal Resistance θ_jc
+7.6ºC/W
Junction Temperature Rise Above Case T_jc
+75ºC
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.