PA1132 Datasheet, PDF (1/2 Pages) Tyco Electronics – 1800-2000 MHz. Linear Power Amplifier

PA1132
Ultra Linear Driver Amplifier - 2 Watts
1800 to 2000 MHz
Features
• LOW NOISE FIGURE: 2.3 dB (TYP.)
• GAIN: 21.3 dB (TYP.)
• HIGH P1dB: +33.5 dBm (TYP.)
• HIGH IP³: +49 dBm (TYP.)
• BROADBAND RESPONSE: 1.5 GHz TO 2.2 GHz (TYP.)
Description
The PA1132 is a discrete hybrid linear power amplifier design,
which uses thick film solder manufacturing processes for accurate
performance and high reliability.
This 2 stage GaAs FET transistor design uses feedback loops for
flat broadband linear performance, with very low noise figure.
The model is particularly suited for power driver applications used
in the base station & repeater infrastructure, and for commercial &
military radios.
Product Image
Rev. V1
Ordering Information
Part Number
PA1132
Package
Flange Mount Carrier
Electrical Specifications: Z₀ = 50Ω, V_CC = +12 V_DC Absolute Maximum Ratings
Parameter
Frequency
Units
MHz
Typical
25ºC
1800-2000
Small Signal Gain (min)
dB
21.3
Gurarnteed
0ºC to +85ºC
1800-2000
19.0
Parameter
Storage Temperature
Operation Base Temperature
Absolute
Maximum
-40ºC to +85ºC
+85ºC
Gain Flatness (max)
dB
Noise Figure (max)
dB
+ 0.25
2.3
+ 0.5
3.0
Max. DC VOltage
Max. Continuous RF Input Power
+15 Vdc
+15 dBm
Reverse Isolation
dB
37.0
Power Output
@ 1.0 dB Comp. (min.)
Output IP³
dBm
dBm
+33.5
+49.0
+32.0
+46.0
Thermal Data: V_CC = +12 V_DC
Parameter
Rating
VSWR Input / Output (max.)
1.6:1 / 1.8:1
2.0:1 / 2.0:1
Thermal Resistance θ_jc
22ºC/W
DC Current
@ +12 Volts (max.)
mA
495
510
Junction Temperature Rise Above Case T_jc
51ºC
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.