MY93C Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Triple-Balanced Mixer

MY93 / MY93C
Triple-Balanced Mixer
Features
• LO 2 TO 18 GHz
• RF 2 TO 18 GHz
• IF 0.03 TO 4 GHz
• LO DRIVE: +10 dBm (NOMINAL)
• WIDE BANDWIDTH
Description
MY93 is a triple balanced mixer, designed for use in military,
commercial and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband soft dielectric baluns to
attain excellent performance. The use of high temperature solder
assembly processes used internally makes it ideal for use in
manual, semi-automated assembly. Environmental screening
available to MIL-STD-883, MIL-STD-202 or MIL-DTL-28837,
consult factory.
Product Image
Rev. V3
Ordering Information
Part Number
MY93
MY93C
Package
Versapac
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω Lo = +10 dBm (Downconverter Application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
fR = 2 to 10 GHz, fL = 2 to 14 GHz, fI = 0.03 to 4 GHz
fR = 10 to 18 GHz, fL = 6 to 18 GHz, fI = 0.03 to 4 GHz
dB
7.5
10.0
dB
8.0
11.0
10.5
11.5
Isolation, L to R (min)
fL = 2 to 18 GHz
dB
29
15
13
Isolation, L to I (min)
fL = 2 to 18 GHz
dB
34
16
14
1 dB Conversion Comp.
fL = +10 dBm
dBm
+4
Input IP3
fR1 = 6 GHz at –6 dBm, fR2 = 6.01 GHz at –6 dBm, fL = 10 GHz at +10 dBm dBm
+14
fR1 = 15 GHz at –6 dBm, fR2 = 15.01 GHz at –6 dBm, fL =18 GHz at +10 dBm dBm
+18
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.