MY50 Datasheet, PDF (1/3 Pages) Tyco Electronics – Triple-Balanced Mixer

MY50 / MY50C
Triple-Balanced Mixer
Features
• LO 2.0 to 26 GHz
• RF 2.0 to 26 GHz
• IF 1.0 to 15 GHz
• LO Drive +10 dBm (nominal)
• High Compression Point
• Very Wide Bandwidth
Description
MY50 is a triple balanced mixer, designed for use in military, com-
mercial and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband soft dielectric baluns to
attain excellent performance. The use of high temperature solder
assembly processes used internally makes it ideal for use in man-
ual, semi-automated assembly. Environmental screening avail-
able to MIL-STD-883, MIL-STD-202 or MIL-DTL-28837, consult
factory.
Ordering Information
Part Number
MY50
MY50C
Package
Versapac
SMA Connectorized
Product Image
Rev. V2
Electrical Specifications: Z₀ = 50Ω Lo = +10 dBm (Downconverter Application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss
(max)
fR = 2.5 to 18 GHz, fL = 2 to 18 GHz, fI = 2 to 10 GHz
fR = 2 to 18 GHz, fL = 2 to 26 GHz, fI = 2 to 12 GHz
fR = 2 to 26 GHz, fL = 2 to 26 GHz, fI = 1 to 15 GHz
7.5
9.5
10.0
dB
8.0
10.5
11.0
9.0
11.5
12.0
SSB Noise Figure (max)
Within 1 db of conversion loss
dB
____
____
____
Isolation, L to R (min)
Isolation, L to I (min)
fL = 2 to 3 GHz
fL = 3 to 26 GHz
fL = 2 to 7 GHz
fL = 7 to 26 GHz
dB
30
22
20
15
18
13
dB
30
22
20
15
18
13
1 dB Conversion Comp.
fL = +10 dBm
dBm
+5
Input IP3
fR1 = 5 GHz at –6 dBm, fR2 = 5.01 GHz at –6 dBm, fL = 8 GHz at +10 dBm
fR1 = 25 GHz at –6 dBm, fR2 = 25.01 GHz at –6 dBm, fL = 15 GHz at +10
dBm
dBm
+15
+15
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.