MRF393_17 Datasheet, PDF (1/7 Pages) M/A-COM Technology Solutions, Inc. – The RF Line Controlled “Q” Broadband Power Transistor

MRF393
The RF Line Controlled “Q” Broadband Power Transistor
100W, 30 to 500MHz, 28V
Designed primarily for wideband large–signal output and driver amplifier
stages in the 30 to 500 MHz frequency range.
Product Image
 Specified 28 V, 500 MHz characteristics —
Output power = 100 W
Typical gain = 9.5 dB (Class AB); 8.5 dB (Class C)
Efficiency = 55% (typ.)
 Built–in input impedance matching networks for broadband operation
 Push–pull configuration reduces even numbered harmonics
 Gold metallization system for high reliability
 100% tested for load mismatch
CASE 744A–01, STYLE 1
Rev. V1
The MRF393 is two transistors in a single package with separate base and collector
leads and emitters common. This arrangement provides the designer with a space
saving device capable of operation in a push–pull configuration.
PUSH–PULL TRANSISTORS
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support