MRF392_15 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – The RF Line Controlled Broadband Power Transistor

MRF392
The RF Line Controlled “Q” Broadband Power Transistor
125W, 30 to 500MHz, 28V
M/A-COM Products
Released - Rev. 07.07
Designed primarily for wideband large–signal output and driver amplifier
stages in the 30 to 500 MHz frequency range.
Product Image
• Specified 28 V, 400 MHz characteristics —
Output power = 125 W
Typical gain = 10 dB
Efficiency = 55% (typ.)
• Built–in input impedance matching networks for broadband operation
• Push–pull configuration reduces even numbered harmonics
• Gold metallization system for high reliability
• 100% tested for load mismatch
CASE 744A–01, STYLE 1
The MRF392 is two transistors in a single package with separate base and collector
leads and emitters common. This arrangement provides the designer with a space
saving device capable of operation in a push–pull configuration.
PUSH–PULL TRANSISTORS
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.