MD_MDS-189 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – High Level Termination Insensitive Mixer

MD- / MDS-189
High Level Termination Insensitive Mixer,
1 - 3500 MHz
Features
• Operates Over Full PCN/PCS/PHS/MSS Bands
• Low Conversion Loss
• Fully Hermetic Package
• Intermodulation Ratio Insensitive to System
Mismatches
• VSWR: <2.0:1 Typical Midband
• Isolation: 35 dB Typical Midband
• High IIP₃ (+28 dBm Typical 1-3500 MHz)
Description
M/A-COM’s MD-189 and MDS-189 are high level
termination insensitive mixers. These devices are
packaged in 8-lead flatpack and SMT packages.
These mixers offer consistent and repeatable flat
intermodulation performance and flat conversion
loss with low spurious signal generation independent
of system mismatch from 1 to 3500 MHz. The
MD-189 and MDS-189 are ideally suited for RF/IF
communications applications requiring high intercept
point performance.
FP-2 (MD-189)
Rev. V4
SF-1 (MDS-189)
Pin Configuration (MD-189)
Pin No.
1
2
3
4
Function
GND
GND
GND
IF
Pin No.
5
6
7
8
Function
LO
GND
GND
RF
Pin Configuration (MDS-189)
Pin No.
Function
Pin No.
Function
1
GND
3
LO
2
IF
4
RF
Absolute Maximum Ratings ¹
Parameter
Max Input Power²
Total Power
LO Power
Absolute Maximum
0.5W Derated to 85^oC
@ 3.2 mW/^oC
+27 dBm
1. Operation of this device above any one of these parameters
nay cause permanent damage.
1
2. Ambient Temperature (T_A) = +25^oC
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.