MC4507 Datasheet, PDF (1/3 Pages) Tyco Electronics – Open Carrier Double-Balanced Mixer For Microwave Telecommunications

MC4507
Open Carrier Double-Balanced Mixer
For Microwave Telecommunications
Features
• LO & RF: 4.0 TO 20.0 GHz
• IF: DC TO 4.0 GHz
• LO DRIVE: +7 dBm (NOMINAL)
• MICROSTRIP INTERFACE
Description
The MC4507 is a double balanced mixer, designed for use in
military, commercial and test equipment applications. The design
utilizes Schottky ring quad diodes and broadband soft dielectric
and ferrite baluns to attain excellent performance. This mixer can
also be used as a phase detector and/or bi-phase modulator since
the IF port is DC coupled to the diodes. The use of high
temperature solder and welded assembly processes used
internally makes it ideal for use in manual, semi-automated
assembly. Environmental screening available to MIL-STD-883,
MIL-STD-202, or MIL-DTL-28837, consult factory.
Product Image
Rev. V2
Ordering Information
Part Number
MC4507
MC4507-2
Package
Open Carrier
Open Carrier
Electrical Specifications: Z₀ = 50Ω Lo = +7 dBm (Downconverter application only)
Parameter
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
Test Conditions
fR =6 to 18 GHz , fL = 6 to 18 GHz , fI = 0 to 2 GHz
fR =6 to 18 GHz , fL = 6 to 18 GHz , fI = 0 to 4 GHz
fR =4 to 20 GHz , fL = 4 to 20 GHz , fI = 0 to 4 GHz
Typical
Units
dB
6.0
dB
6.5
dB
7.5
Guaranteed
+25ºC -54º to +85ºC
7.5
8.0
8.0
8.5
9.0
9.5
Isolation, L to R (min)
Isolation, L to I (min)
Isolation, R to I (min)
1 dB Conversion Comp.
fL = 8 to 16 GHz
fL = 6 to 18 GHz
fL = 4 to 20 GHz
fL = 8 to 16 GHz
fL = 6 to 18 GHz
fL = 4 to 20 GHz
fL = 4 to 20 GHz
fL = +7 dBm
dB
35
25
23
dB
30
18
16
dB
20
12
10
dB
35
25
23
dB
30
18
16
dB
23
12
10
dB
35
dBm
+0
Input IP3
fR1 = 8.4 GHz at –5 dBm, fR2 = 8.42 GHz at –5 dBm,
fL = 8.6 GHz at +7 dBm
dBm
+10
fR1 = 14.4 GHz at –5 dBm, fR2 = 14.42 GHz at –5 dBm,
fL = 15.4 GHz at +7 dBm
dBm
+11
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.