English
Language : 

MAVC-010000-001865 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – VCO, SMT
MAVC-010000-001865
VCO, SMT
1780—1950 MHz
Rev. VB
Features
• High Performance, Low Cost
• Low Phase Noise
• Miniature SMT Package (LSM1)
• RoHs Compliant
Description
This VCO, in a SMT package, provides electrical shielding, easy
PCB assembly and repeatable performance. The oscillator is
designed for use in wireless base stations and other applica-
tions.
M/A-COM VCOs are manufactured in an ISO9001 certified facil-
ity, incorporating surface mount assembly and automated elec-
trical testing. This ensures consistent electrical performance
and quality over volume production quantities.
Devices are designed to function after exposure to the shock,
vibration, thermal shock and moisture conditions typically en-
countered in base station and other infrastructure environments.
Electrical Specifications1:
TA = +25°C, Z0 = 50 Ohms, Vcc = 5V.
Parameter
Frequency Range
RF Output Power
Tuning Voltage
Phase Noise
Average Tuning Sensitivity
Harmonic Output
Frequency Pushing
Frequency Pulling
Frequency Drift
Tune Input Capacitance
Supply Voltage (VCC)
Test Conditions
Over Top 2
Over VCC and Top 2
Over Top 2
SSB at 10 kHz offset from carrier
SSB at 100 kHz offset from carrier
VCC = +5.25V ± 0.25V
1.5:1 VSWR load, all phases
Over Top 2
VCO oscillates
Pin Configuration
Pin No.
1
2
3
4
Function
RF Output
VCC
Vtune
GND
Units
MHz
dBm
V
dBc/Hz
dBc/Hz
MHz/V
dBc
MHz/V
MHz
MHz/°C
pF
V
Min
1780
-1.0
+0.5
+4.75
Typ
-103
-124
20
100
-0.08
50
+5.00
Max
1950
+3.0
+11
-100
-120
-10
3.5
500
+5.25
1. All specification limits are indicated values @ +25 ºC and apply over Fout unless otherwise stated.
2. See Absolute Maximum Ratings for operating temperature.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.