MAUC-010515-V3 Datasheet, PDF (1/7 Pages) M/A-COM Technology Solutions, Inc. – Up Converter

MAUC-010515
Up Converter
40.5 - 43.5 GHz
Features
 Integrates Image Reject (Balanced) Mixer, LO
Buffer, LO Doubler, and RF Buffer
 11 dB Conversion Gain
 30 dBm Output Third Order Intercept (OIP3)
 -15 dBm (2) LO Leakage (at RF Port)
 Variable Gain with Adjustable Bias
 Lead-Free 6 mm Laminate Package
 RoHS* Compliant and 260°C Reflow Compatible
Description
The MAUC-010515 is an integrated USB up-
converter that has a typical conversion gain of
10 dB, and an image rejection of greater than
15 dBc. The device includes a LO doubler and
buffer, and can be tuned to give 2LO leakage of
less than -15 dBm. Variable gain can be achieved
by adjusting the bias, with turn-down trajectories
optimized to maintain linearity and 2LO leakage
over the gain control range. At full gain, an OIP3 of
30 dBm is typical. It is ideally suited for 42 GHz
band point-to-point radios.
Each device is 100% RF tested to ensure
performance compliance. The part is fabricated
using an efficient pHEMT process.
Ordering Information
Part Number
MAUC-010515-000000
MAUC-010515-TR0500
MAUC-010515-001SMB
Package
Bulk Quantity
500 Piece Reel
Sample Evaluation Board
Functional Schematic
Rev. V3
Pin Configuration ¹
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Function
LO
VG3
VD3
VG1
VD1
VG2
VD2
RF
VG4
I* Input
I Input
Q Input
Q* Input
1. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.