MASWSS0204 Datasheet, PDF (1/3 Pages) Tyco Electronics – GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz

MASWSS0204
GaAs SPDT 2.7 V High Power Switch
DC - 3.0 GHz
Features
• Low Voltage Operation: 2.7 V
• High IP3: +56 dBm
• Low Insertion Loss: 0.30 dB at 1 GHz
• High Isolation: 25 dB at 1 GHz
• 0.5 micron GaAs PHEMT Process
• Lead-Free SC70 Package
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of MASWSS0117
Description
The MASWSS0204 is a GaAs pHEMT MMIC single
pole double throw (SPDT) high power switch in a low
cost SC70 six lead package. The MASWSS0204 is
ideally suited for applications where high power, low
control voltage, low insertion loss, high isolation,
small size and low cost are required.
Typical applications are for CDMA handset
systems that connect separate transceiver and/or
GPS functions to a common antenna, as well as
other related handset and general purpose
applications. The MASWSS0204 can be used in all
systems operating up to 3 GHz requiring high power
at low control voltage.
The MASWSS0204 is fabricated using a 0.5 micron
gate length GaAs pHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information ^1,2
Part Number
MASWSS0204
MASWSS0204TR-3000
MASWSS0204SMB
Package
Bulk Packaging
3000 piece reel
Sample Test Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
Functional Block Diagram
Rev. V3
Pin Configuration
Pin No.
1
2
3
4
5
6
Pin Name
V2
RFC
V1
RF1
GND
RF2
Description
Vcontrol 2
RF Common
Vcontrol 1
RF Port 1
RF Ground
RF Port 2
MASWSS0204 orientation in tape
Note:
Device supplied on tape and reel is the reverse
orientation of that shown in Application Note M513.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.