MASWSS0201_15 Datasheet, PDF (1/7 Pages) M/A-COM Technology Solutions, Inc. – GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch

MASWSS0201
GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch
DC - 2.5 GHz
Features
 Ideal for CATV, DTV, DVR, STB Applications
 Default-On in Unpowered State (RFC-RF1 Path)
 Broadband Performance: DC-2.5 GHz
 Low Insertion Loss: 1.1 dB at 1 GHz
 High Isolation: > 60dB @ 100MHz
 Single Control Operation
 Power Handling: > 20 dBm P1dB
 Lead-Free 3 mm 12-lead PQFN Package
 100% Matte Tin Plating over Copper
 Halogen-Free ―Green‖ Mold Compound
 RoHS* Compliant and 260°C Reflow Compatible
 Configurable for Non-terminated Operation
Functional Schematic
GND RFC
N/C
RF1
Term 1
GND
GND
Rev. V1
V_C
RF2
Term 2
GND
Description
M/A-COM’s MASWSS0201 is a broadband GaAs
PHEMT MMIC SPDT terminated switch in a low
cost, lead-free 3 mm 12-lead PQFN package. The
MASWSS0201 is ideally suited for applications
where an unpowered on state is critical in a single
control line SPDT terminated switch. The
unpowered condition is the same as the V_C = 0
condition. This part can also be configured as a
reflective switch with minimal impact to the RF
performance.
The MASWSS0201 delivers high isolation, low
insertion loss and high linearity up to 2.5 GHz.
The MASWSS0201 is fabricated using a 0.5 micron
gate length GaAs E/D PHEMT process. The
process features full passivation for performance
and reliability.
Ordering Information ¹
Part Number
Package
MASWSS0201TR-3000
3000 piece reel
MASWSS0201SMB
Sample Test Board
(Includes 5 Samples)
1. Reference Application Note M513 for reel size information.
GND N/C GND
Pin Configuration ²
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Pin Name
N/C
RF1
Term 1 GND³
GND
N/C
GND
Term 2 GND³
RF2
VC
GND
RFC
GND
Paddle ⁴
Description
No Connection
RF Port 1
Termination 1 Ground
Ground
No Connection
Ground
Termination 2 Ground
RF Port 2
Control
Ground
RF Input
Ground
RF and DC Ground
2. M/A-COM recommends that all unused (N/C) pins be
connected to ground. All data on this datasheet was taken
with N/C pins connected to ground.
3. Terminated grounds require DC blocking capacitors; see
application schematic.
4. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support