MASWSS0162 Datasheet, PDF (1/3 Pages) Tyco Electronics – GaAs SPST Switch DC - 2.5 GHz

MASWSS0162
GaAs SPST Switch
DC - 2.5 GHz
Features
• Very Low Power Consumption: 50 µW
• Low Insertion Loss: 1.0 dB
• High Isolation: 35 dB up to 2 GHz
• Very High Intercept Point: 46 dBm IP3
• Nanosecond Switching Speed
• Temperature Range: -40°C to +85°C
• Lead-Free SOIC-8 Plastic Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of SW-259
Description
M/A-COM’s MASWSS0162 is a GaAs MMIC SPST
switch in a lead-free SOIC-8 lead surface mount
plastic package. The MASWSS0162 is ideally suited
for use where low power consumption is required.
Typical applications include transmit/receive switch-
ing, switch matrices and switched filter banks in sys-
tems such as radio and cellular equipment, PCM,
GPS, fiber optic modules, and other battery powered
radio equipment.
The MASWSS0162 is fabricated using a monolithic
GaAs MMIC using a mature 1 micron process. The
process features full chip passivation for increased
performance and reliability.
Ordering Information¹
Part Number
Package
MASWSS0162
Bulk Packaging
MASWSS0162TR
1000 piece reel
1. Reference Application Note M513 for reel size information.
Functional Schematic
Rev. V3
8
7
6
5
1
2
3
4
Pin Configuration
PIN No. Description
1
Ground
2
A
3
B
4
Ground
PIN No.
5
6
7
8
Description
RF Port 2
Ground
Ground
RF Port 1
Absolute Maximum Ratings ^2,4
Parameter
Absolute Maximum
Input Power ³
0.05 GHz
0.5 – 2.0 GHz
+27 dBm
+34 dBm
Control Voltage
+5 V, -8.5 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. When the RF Input power is applied to a terminated port, the
absolute maximum is +32 dBm.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.