MASWSS0118 Datasheet, PDF (1/3 Pages) Tyco Electronics – GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz

MASWSS0118
GaAs SP4T 2.5 V High Power Switch
DC - 3.0 GHz
Features
• Low Voltage Operation: 2.5 V
• Low Harmonics: < -65 dBc at +34 dBm & 1 GHz
• Low Insertion Loss: 0.65 dB at 1 GHz
• High Isolation: 23 dB at 2 GHz
• 4 mm 16-Lead PQFN Package
• 0.5 micron GaAs PHEMT Process
Description
M/A-COM’s MASWSS0118 is a GaAs PHEMT
MMIC single pole four throw (SP4T) high power
switch in a low cost 4 mm 16-lead PQFN package.
The MASWSS0118 is ideally suited for applications
where high power, low control voltage, low insertion
loss, high isolation, small size, and low cost are
required.
Typical applications are for GSM and DCS handset
systems that connect separate transmit and receive
functions to a common antenna, as well as other
handset and related applications. This part can be
used in all systems operating up to 3.0 GHz
requiring high power at low control voltage.
The MASWSS0118 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information ¹
Part Number
Package
MASWSS0118TR
1000 piece reel
MASWSS0118TR-3000
3000 piece reel
MASWSS0118SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
Functional Schematic
Pin 16
Pin 1
V1
RF1
39 pF
GND
RF2
39 pF
Rev. V3
RF4
39 pF
GND
GND
RF3
39 pF
Pin Configuration
Pin No.
Pin Name
Description
1
V1
Control 1
2
RF1
RF Port 1
3
GND
RF Ground
4
RF2
RF Port 2
5
GND
RF Ground
6
V2
Control 2
7
V3
Control 3
8
GND
RF Ground
9
RF3
RF Port 3
10
GND
RF Ground
11
GND
RF Ground
12
RF4
RF Port 4
13
GND
RF Ground
14
V4
Control 4
15
GND
RF Ground
16
ANT
17
Paddle ²
Antenna Port
RF Ground
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.