MASWSS0117_V3 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – GaAs SPDT 2.7 V High Power Switch

MASWSS0117
GaAs SPDT 2.7 V High Power Switch
DC - 3.0 GHz
Features
• Low Voltage Operation: 2.7 V
• High IP3: +56 dBm
• Low Insertion Loss: 0.30 dB at 1 GHz
• High Isolation: 25 dB at 1 GHz
• SC70 6-Lead Package
• 0.5 micron GaAs PHEMT Process
Description
The MASWSS0117 is a GaAs pHEMT MMIC single
pole double throw (SPDT) high power switch in a low
cost SC70 6-lead package. The MASWSS0117 is
ideally suited for applications where high power, low
control voltage, low insertion loss, high isolation,
small size and low cost are required.
Typical applications are for CDMA handset systems
that connect separate transceiver and/or GPS
functions to a common antenna, as well as other
related handset and general purpose applications.
The MASWSS0117 can be used in all systems
operating up to 3.0 GHz requiring high power at low
control voltage.
The MASWSS0117 is fabricated using a 0.5 micron
gate length GaAs pHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information¹
Part Number
MASWSS0117
MASWSS0117TR
MASWSS0117TR-3000
MASWSS0117SMB
Package
Bulk Packaging
1000 piece reel
3000 piece reel
Sample Test Board
1. Reference Application Note M513 for reel size information.
Functional Block Diagram
Rev. V3
Pin Configuration
Pin No.
1
2
3
4
5
6
Pin Name
V2
RFC
V1
RF1
GND
RF2
Description
Vcontrol 2
RF Common
Vcontrol 1
RF Port 1
RF Ground
RF Port 2
MASWSS0117 orientation in tape
MASWSS0117 Device Marking
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.