MASWSS0100 Datasheet, PDF (1/3 Pages) Tyco Electronics – GaAs SP3T 2.5 V High Power Switch 0.1 - 3.0 GHz

MASWSS0100
GaAs SP3T 2.5 V High Power Switch
0.1 - 3.0 GHz
Features
• Low Voltage Operation: 2.5V
• Low Harmonics: -70 dBc at +34 dBm & 1 GHz
• Low Insertion Loss: 0.5 dB at 1 GHz
• High Isolation: 20 dB at 2 GHz
• 0.5 micron GaAs PHEMT Process
• Supplied as Known Good Die
Description
M/A-COM’s MASWSS0100 is a GaAs PHEMT
MMIC single pole three throw (SP3T) high power
switch die. The MASWSS0100 is ideally suited for
applications where high power, low control voltage,
low insertion loss, high isolation, small size and low
cost are required.
Typical applications are for GSM, DCS and PCS
handset systems that connect separate transmit and
receive functions to a common antenna, as well as
other handset and related applications. This part
can be used in all systems operating up to 2.5 GHz
requiring high power at low control voltage.
The MASWSS0100 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and reliabil-
ity.
Ordering Information¹
Part Number
Product Description
MASWSS0100-DIE
Separated Die on Grip Ring¹
1. Die quantity varies.
Die Bond Pad Layout
V1
RFC
Rev. V2
V3
RF1
RF2
V2
RF3
Pad Configuration
Pad Name
V1
RF1
RF2
V2
RF3
V3
RFC
Description
Control 1
RF Port 1
RF Port 2
Control 2
RF Port 3
Control 3
Antenna/Common Port
Absolute Maximum Ratings ^2,3
Parameter
Absolute Maximum
Input Power
+38 dBm
Voltage
± 8.5 volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.