MASWSS0029 Datasheet, PDF (1/3 Pages) Tyco Electronics – GaAs SPDT 2.8 V High Power Switch DC - 3.0 GHz

MASWSS0029
GaAs SPDT 2.8 V High Power Switch
DC - 3.0 GHz
Features
• Low Voltage Operation: 2.8V
• High IP3: +60 dBm
• Low Insertion Loss: 0.40 dB at 1.0 GHz
• High Isolation: 24.5 dB at 1.0 GHz
• SOT-26 Package
• 0.5 micron GaAs PHEMT Process
Description
M/A-COM’s MASWSS0029 is a GaAs PHEMT
MMIC single pole double throw (SPDT) high power
switch in a low cost SOT-26 package. The
MASWSS0029 is ideally suited for applications
where high power, low control voltage, low insertion
loss, high isolation, small size and low cost are re-
quired.
Typical applications are for CDMA handset systems
that connect separate transceiver and/or GPS func-
tions to a common antenna, as well as other related
handset and general purpose applications. This part
can be used in all systems operating up to 3.0 GHz
requiring high power at low control voltage.
The MASWSS0029 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and reliabil-
ity.
Ordering Information¹
Part Number
Package
MASWSS0029
Bulk Packaging
MASWSS0029TR
1000 piece reel
MASWSS0029SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
Functional Schematic
PIN 1
Rev. V2
PIN 6
39 pF
RF1
GND
RF2
39 pF
V1
RFC
39 pF
V2
Pin Configuration
Pin No.
1
2
3
4
5
6
Pin Name
RF1
GND
RF2
V2
RFC
V1
Description
RF Port 1
RF Ground
RF Port 2
Control 2
RF Common Port
Control 1
Absolute Maximum Ratings ^2,3
Parameter
Absolute Maximum
Input Power
(0.5 - 3 GHz, 3 V Control)
Operating Voltage
Operating Temperature
Storage Temperature
+35 dBm
+8.5 volts
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.