MASWSS0024 Datasheet, PDF (1/4 Pages) Tyco Electronics – SPDT High Isolation Terminated Switch, 0.5 - 3.0 GHz

MASWSS0024
SPDT High Isolation Terminated Switch
0.01 - 3.0 GHz
Features
• Positive Voltage Control: 0 / +5 V
• High Isolation: 55 dB typ. @ 0.9 GHz
50 dB typ. @ 1.9 GHz
• 50-Ohm Internal Terminations
• Low Insertion Loss: 0.6 dB typ. @ 0.9 GHz,
0.7 dB typ. @ 1.9 GHz
• MSOP-8-EP Package
Description
The M/A-COM MASWSS0024 GaAs monolithic
switch provides high isolation in a low-cost, plastic
surface mount package. The MASWSS0024 is ideal
for applications across a broad range of frequencies
including synthesizer switching, transmit / receive
switching, switch matrices and filter banks in
systems such as radio and cellular equipment, PCS,
GPS, and fiber optic modules.
M/A-COM fabricates the MASWSS0024 using a 1.0-
micron gate length MESFET process. The process
features full chip passivation for performance and
reliability.
Ordering Information¹
Part Number
MASWSS0024
Package
Bulk Packaging
MASWSS0024TR
1000 piece reel
MASWSS0024TR-3000
3000 piece reel
MASWSS0024SMB
Sample Board
1. Reference Application Note M513 for reel size information.
Functional Block Diagram
Rev. V6
Pin Configuration²
Pin
Function
Pin
1
V1
5
2
V2
6
3
RF Common
7
4
Ground
8
Function
RF2
Ground
Ground
RF1
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
Absolute Maximum Ratings ^3,4
Parameter
Absolute Maximum
Input Power (0.5 - 3.0 GHz)
3V Control
5V Control
+30 dBm
+33 dBm
Operating Voltage
+8.5 Volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.