MASW4060G Datasheet, PDF (1/3 Pages) Tyco Electronics – GaAs SP4T Switch DC - 4.0 GHz

MASW4060G
GaAs SP4T Switch
DC - 4.0 GHz
Features
• Low Insertion Loss, 1.2 dB Typical
• Fast Switching Speed, 4 nS Typical
• Ultra Low DC Power Consumption
• Terminated Option
• RoHS* Compliant
Pad Layout
Rev. V4
Description
M/A-COM’s MASW4060G is an SPDT absorptive or
reflective GaAs MESFET MMIC. This part combines
small size, low insertion loss and power
consumption with high isolation. Ideal for many
applications and module use. It will function well for
designs below 4.0 GHz.
The MASW4060G is fabricated using a mature 1-
micron gate length GaAs MESFET process. The
process features full chip passivation for increased
performance and reliability.
Ordering Information
Part Number
MASW4060G
1. Die quantity varies.
Schematic
Package
DIE ¹
* Restrictions on Hazardous Substances, European Union
Directive 2002/95/EC.
Die Size - Inches (mm)
0.076 x 0.058 x 0.010 (1.920 x 1.470 x 0.25)
Absolute Maximum Rating^2,3
Parameter
Absolute Maximum
Control Value (A or B)
-8.5 Vdc
Max Input RF Power
+34 dBm
Storage Temperature
-65°C to +175°C
Max Operating Temperature
+175°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
Bond Pad Dimensions
Bond Pad
Dimensions - Inches (mm)
RF
0.005 x 0.005 (0.125 x 0.125)
RF1, RF2, RF3, RF4
0.004 x 0.004 (0.100 x 0.100)
A1, A2, A3, A4
0.004 x 0.004 (0.100 x 0.100)
B1, B2, B3, B4
G1, G2, G3, G4 ⁴
T1, T2, T3, T4 ⁵
0.004 x 0.004 (0.100 x 0.100)
0.008 x 0.004 (0.200 x 0.100)
0.006 x 0.005 (0.150 x 0.125)
4. “G” pads designate internal grounds necessary to maintain
data sheet isolation. These are not DC blocked and would
need to be blocked if positive control voltage is required.
5. “T” pads denote a 50 Ω termination path connected to each
RFx port. If bonded to ground, it will cause the related port to
be absorptive, or matched, in the isolated condition. As de-
scribed in note 4, these pads are also not DC blocked.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.