MASW2040_15 Datasheet, PDF (1/5 Pages) M/A-COM Technology Solutions, Inc. – GaAs DPDT Switch

MASW2040
GaAs DPDT Switch
DC - 2.0 GHz
Features
 Cascadable
 Low Insertion Loss
 Low DC Power Consumption
 Low Distortion Operation (Quiet Mode)
 Useful as a Building Block for
-Digital Attenuators
-Digital Delay Lines
-Digital Phase Shifters
-Digital Switched Filter Elements
Description
M/A-COM’s MASW2040 is a GaAs MMIC DPDT
switch die. The MASW2040 is ideally suited for use
where low power consumption is required.
Typical applications include transmit/receive
switching, switch matrices, and switched filter banks
in systems such as radio and cellular equipment,
PCM, GPS, fiber optic modules, and other battery
powered radio equipment.
Ordering Information
Part Number
MASW2040
Package
DIE
Absolute Maximum Rating ^1,2
Parameter
Absolute Maximum
Control Value (A or B)
-8.5 Vdc
Max Input RF Power
+34 dBm
Storage Temperature
-65°C to +175°C
Max Operating Temperature
+175°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
Pad Layout
RFA1
Rev. V3
RFA2
RFB1
RFB2
Die Size—Inches (mm)
0.043 x 0.037 x 0.010 (1.10 x 0.94 x 0.25)
Bond Pad Dimensions
Bond Pad
RF1, RF2
RFA1, RFB1
RFA2, RFB2
A, B, Ac, Bc
Dimensions - Inches (mm)
0.004 x 0.007 (0.102 x0.182)
0.005 x 0.004 (0.133 x 0.100)
0.005 x 0.004 (0.133 x 0.100)
0.004 x 0.004 (0.100 x 0.100)
Schematic
RFA1
A
RFA2
RF1
RF2
RFB1
B
RFB2
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support