MASW-010350 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – SP4T High Isolation Terminated Switch 0.01 - 4.0 GHz

MASW-010350
SP4T High Isolation Terminated Switch
0.01 - 4.0 GHz
Features
 High Isolation: 60 dB @ 2.1 GHz
 Insertion Loss: 0.8 dB @ 2.1 GHz
 Input IP3: 50 dBm Typical @ 2.1 GHz
 Integral CMOS Decoder
 Low Gate Lag for timing sensitive applications
 5 States: 4 ON paths and All-Off State
 50 Ω Terminated Outputs (Off-State)
 Lead-Free 4 mm 24-Lead PQFN package
 RoHS* Compliant and 260°C Reflow Compatible
 Optional 2 Control Operation (no All-Off State)
Description
The MASW-010350 is an industry leading high
isolation single pole four throw (SP4T) switch. This
device design is optimized to take advantage of
separate GaAs pHEMT switch die and CMOS driver
die. The switch circuit design is symmetric and
combined with the separate CMOS decoder allows it
to maintain an excellent combination of insertion
loss and isolation for all states. This makes the
device ideal for band switching in multi-channel and
multi-mode base-station applications as well as
other applications where a compact, high isolation,
SP4T switch is required.
The MASW-010350 switch die is fabricated using a
mature 0.5 micron gate length GaAs pHEMT
process and features full passivation for enhanced
performance and reliability.
The MASW-010350 is offered in an industry
standard lead-free 4mm 24-Lead PQFN RoHS
compliant plastic package, which is ideal for high
volume surface mount reflow assembly.
Ordering Information ^1,2
Part Number
Package
MASW-010350-TR3000
3000 piece reel
MASW-010350-001SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
Functional Schematic
Rev. V1
Pin Configuration^3,4
Pin
No.
Description
Pin
No.
Description
1
No Connection
13
No Connection
2
No Connection
14
RF1
3
No Connection
15
No Connection
4
No Connection
16
5
RF4
17
V_DD
V1 Control
6
No Connection
18
V2 Control
7
No Connection
19
V3 Control
8
RF3
20
Ground
9
No Connection
21
No Connection
10 No Connection
22
RFC
11
RF2
23
No Connection
12 No Connection
24
No Connection
25 Ground (paddle)
3. M/A-COM Technology Solutions recommends connecting all
N/C pins to RF and DC ground in the PCB layout.
4. The exposed pad centered on the package bottom (P25)
MUST be connected to RF and DC ground in the PCB layout.
*Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.