MASW-008177 Datasheet, PDF (1/4 Pages) Tyco Electronics – SPST High Isolation CATV Switch 5 - 1000 MHz

MASW-008177
SPST High Isolation CATV Switch
5 - 1000 MHz
Features
• 75 Ohm Impedance
• Positive Voltage Control (0 / +5 V)
• Input Terminated (Off State)
• Low Insertion Loss: 0.62 dB at 870 MHz
• High Isolation: 54 dB at 870 MHz
• 0.5 micron GaAs PHEMT Process
• Lead-Free 3 mm 12-Lead PQFN Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of MASWSS0067
Description
M/A-COM’s MASW-008177 is a GaAs PHEMT
MMIC single pole single throw (SPST) switch in a
low cost 3 mm 12-lead PQFN package. The
MASW-008177 is ideally suited for applications
where low control voltage, low insertion loss, high
isolation, small size and low cost are required.
Typical applications are to replace mechanical
relays in CATV systems. This part can be used in
all 75 ohm systems operating up to 1.0 GHz.
The MASW-008177 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information ¹
Part Number
Package
MASW-008177-000000
Bulk Packaging
MASW-008177-TR1000
1000 piece reel
MASW-008177-TR3000
3000 piece reel
MASW-008177-001SMB
5-1000 MHz Configuration,
Sample Board
1. Reference Application Note M513 for reel size information.
Functional Schematic
Rev. V1
Pin Configuration ²
Pin No.
Pin Name
Description
1
GND
Ground
2
RF1
RF In
3
G1
RF Ground
4
V1
Control 1
5
N/C
No Connection
6
V2
Control 2
7
GND
Ground
8
RF2
RF Out
9
GND
Ground
10
N/C
No Connection
11
N/C
No Connection
12
GT1
RF Ground
2. The exposed pad centered on the package bottom must be
connected to both RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.