MASW-005102 Datasheet, PDF (1/7 Pages) M/A-COM Technology Solutions, Inc. – HMIC™ Silicon PIN Diode Switch

MASW-005102-13600
HMIC™ Silicon PIN Diode Switch
with Integrated Bias Network
RoHS Compliant
Rev. V2
Features
♦ Broad Bandwidth Specified up to 18 GHz
♦ Usable up to 26 GHz
♦ Integrated Bias Network
♦ Low Insertion Loss / High Isolation
♦ Rugged, Glass Encapsulated Construction
♦ Fully Monolithic
Description
The MASW-005102-13600 device is a SP5T broadband
switch with integrated bias network utilizing M/A-COM's
HMIC^TM (Heterolithic Microwave Integrated Circuit)
process, US Patent 5,268,310. This process allows the
incorporation of silicon pedestals that form series and
shunt diodes or vias by imbedding them in low loss,
low dispersion glass. By using small spacing between
elements, this combination of silicon and glass gives
HMIC devices low loss and high isolation performance
with exceptional repeatability through low millimeter
frequencies. Large bond pads facilitate the use of low
inductance ribbon bonds, while gold backside
metallization allows for manual or automatic chip
bonding via 80/20 - Au/Sn, 62/36/2 - Sn/Pb/Ag solders
or electrically conductive silver epoxy.
Applications
These high performance switches are suitable for use
in multi-band ECM, Radar, and instrumentation control
circuits where high isolation to insertion loss ratios are
required. With a standard +5V/-5V, TTL controlled PIN
diode driver, 80nS switching speeds can be achieved.
Yellow areas denote wire bond pads
Parameter
Operating Temperature
Storage Temperature
Junction Temperature
Applied Reverse Voltage
RF Incident Power
Bias Current +25°C
Absolute Maximum
-65^oC to +125^oC
-65^oC to +150^oC
+175^oC
50V
+33dBm C.W.¹
±20mA
Note:
1. Maximum operating conditions for a
combination of RF power, D.C. bias and
temperature:
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.