MASW-004103-1365_V4 Datasheet, PDF (1/8 Pages) M/A-COM Technology Solutions, Inc. – HMICTM Silicon PIN Diode SP4T Switch

MASW-004103-1365
HMIC^TM Silicon PIN Diode SP4T Switch
50 MHz - 20 GHz
Rev. V4
Features
• Specified from 50 MHz to 20 GHz
• Usable up to 26 GHz
• Low Insertion Loss
• High Isolation
• Low Parasitic Capacitance and Inductance
• RoHS Compliant Surmount™ Package
• Rugged, Fully Monolithic
• Glass Encapsulated Construction
• Up to +38 dBm C.W. Power Handling¹ @ +25°C
• Silicon Nitride Passivation
• Polymer Scratch Protection
Description
The MASW-004103-1365 is a Surmount™
broadband monolithic SP4T switch using series and
shunt connected silicon PIN diodes. This part is
designed for use as a moderate signal, high
performance switch in applications up to 20 GHz.
This Surface Mount chipscale configuration is
optimized for broadband performance with minimal
associated parasitics usually associated with hybrid
MIC designs incorporating beam lead and PIN
diodes that require chip and wire assembly.
The MASW-004103-1365 is fabricated using M/A-
COM Technology Solutions patented HMIC™
(Heterolithic Microwave Integrated Circuit) process,
US Patent 5,268,310. This process allows the
incorporation of silicon pedestals that form series
and shunt diodes or vias by imbedding them in low
loss, low dispersion glass. By using small spacing
between elements, this combination of silicon and
glass gives HMIC devices low loss and high isolation
performance through low millimeter frequencies.
Selective backside metalization is applied producing
a Surface Mount device. The topside is fully
encapsulated with silicon nitride and has an
additional polymer layer for scratch and impact
protection. These protective coatings prevent
damage to the junction and the anode airbridge
during handling and assembly.
Functional Schematic
J3
J4
J2
J5
J1
Pin Configuration ²
Pin
Function
J1
RFC
J2
RF1
Ord_J3ering
Information
2
RF2
J4
RF3
J5
RF4
2. The exposed pad centered on the chip bottom must be
connected to RF and DC ground.
Ordering Information
Part Number
MASW-004103-13650G
Package
50 piece gel pack
MASW-004103-13655P
500 piece reel
1. Power Handling Testing performed @ 2GHz
1
MASW-004103-13650P
MASW-004103-001SMB
3000 piece reel
Sample Test Board
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.