MASW-002102-13580_V5 Datasheet, PDF (1/7 Pages) M/A-COM Technology Solutions, Inc. – HMIC Silicon PIN Diode Switches

MASW-002102-13580
MASW-003102-13590
HMIC™ Silicon PIN Diode Switches
with Integrated Bias Network
Rev. V5
Features
 Broad Bandwidth Specified up to 18 GHz
 Usable up to 26 GHz
 Integrated Bias Network
 Low Insertion Loss / High Isolation
 Rugged
 Fully Monolithic
 Glass Encapsulate Construction
 RoHS Compliant* and 260°C Reflow Compatible
Description
The MASW-002102-13580 and MASW-003102-13590
devices are SP2T and SP3T broad band switches with
integrated bias networks utilizing M/A-COM Technology
Solutions HMIC^TM (Heterolithic Microwave Integrated
Circuit) process, US Patent 5,268,310. This process
allows the incorporation of silicon pedestals that form
series and shunt diodes or vias by imbedding them in
low loss, low dispersion glass. By using small spacing
between elements, this combination of silicon and glass
gives HMIC devices low loss and high isolation per-
formance with exceptional repeatability through low
millimeter frequencies. Large bond pads facilitate the
use of low inductance ribbon bonds, while gold back-
side metallization allows for manual or automatic chip
bonding via 80/20 - Au/Sn, 62/36/2 - Sn/Pb/Ag solders
or electrically conductive silver epoxy.
Parameter
Operating Temperature
Storage Temperature
Junction Temperature
Applied Reverse Voltage
Absolute Maximum
-65^oC to +125^oC
-65^oC to +150^oC
+175^oC
50V
RF Incident Power
+33dBm C.W.
Bias Current +25°C
±20mA
Max. operating conditions for a combination
of RF power, D.C. bias and temperature:
+33dBm CW @ 15mA (per diode) @+85°C
MASW-002102-13580
MASW-003102-13590
Yellow areas denote wire bond pads
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.