MASW-001100-1190 Datasheet, PDF (1/9 Pages) M/A-COM Technology Solutions, Inc. – HMIC™ Silicon PIN Diode Switches RoHs Compliant

MASW-001100-1190
MASW-002100-1191
MASW-003100-1192
HMIC™ Silicon PIN Diode Switches
RoHs Compliant
Rev. V6
Features
♦ Broad Bandwidth
♦ Specified from 50MHz to 20GHz
♦ Usable from 50MHz to 26.5GHz
♦ Lower Insertion Loss / Higher Isolation
than pHempt
♦ Rugged
♦ Fully Monolithic,
♦ Glass Encapsulated Construction
♦ Up to +33dBm C.W. Power Handling
MASW-001100-1190
Description
The MASW-001100-1190, MASW-002100-1191 and
MASW-003100-1192 are broadband monolithic
switches using series and shunt connected silicon
PIN diodes. They are designed for use as 2W, high
performance switches in applications up to
26.5GHz. They provide performance levels superior
to those realized by hybrid MIC designs
incorporating beamlead and PIN chip diodes that
require chip and wire assembly.
MASW-002100-1191
These switches are fabricated using M/A-COM’s
patented HMIC^TM (Heterolithic Microwave Integrated
Circuit) process, US Patent 5,268,310. This process
allows the incorporation of silicon pedestals that
form series and shunt diodes or vias by imbedding
them in low loss, low dispersion glass. By using
small spacing between elements, this combination
of silicon and glass gives HMIC devices low loss
and high isolation performance through low
millimeter frequencies.
Large bond pads facilitate the use of low inductance
ribbon leads, while gold backside metallization
allows for manual or automatic chip bonding via
80/20, AuSn solder or conductive Ag epoxy.
Parameter
Operating Temperature
Storage Temperature
Junction Temperature
Applied Reverse Voltage
RF C.W. Incident Power
Bias Current +25°C
Absolute Maximum
-65^oC to +125^oC
-65^oC to +150^oC
+175^oC
| - 50V |
+33dBm C.W.
±20mA
Max operating Conditions for a Combination of
RF Power, D.C. Bias and Temperature:
+33dBm CW @ 15mA (per diode) @+85°C
MASW-003100-1192
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.