MASL-011023 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – SPDT Switch & Limiter

MASL-011023
SPDT Switch & Limiter
2.7 - 3.5 GHz
Features
 125 W CW T_X Input Power Handling @ 85°C
Baseplate
 Integrates SP2T & Limiter Function
 Low T_X and R_X Insertion Loss
 High Isolation on Receive Path
 10 dBm R_X Flat Leakage
 Operates from +/-5 V & +30 V
 Ultra Fast Recovery Time <100 ns
 Surface Mount 7 mm 32-lead HQFN JEDEC
MSL1 Package
 RoHS* Compliant and 260°C Reflow Compatible
Description
The MASL-011023 is a plastic packaged high power
switch-limiter with integrated bias networks. This
surface mount, small configuration is designed with
minimal parasitics usually associated with hybrid
MIC designs incorporating beam lead and/or
bondable PIN diodes that require chip and wire
assembly. This standard HQFN enables reliable,
repeatable high volume manufacturing with
MACOMs’ design techniques to maximize heat
dissipation in a plastic package.
This SP2T switch-limiter is designed to optimize Ant
to R_X loss and handle +51 dBm CW through the
T_X path to an external high power 50 Ω termination.
This device incorporates a high power SP2T switch,
a limiter function, and a fully integrated RF & DC
bias network.
The MASL-011023 is designed to be used in 2.7 -
3.5 GHz higher power switch applications that
require high volume, surface mount, solder reflow
manufacturing. It is RoHS compliant, durable,
reliable and capable of meeting all military,
commercial, and industrial environments.
Ordering Information
Part Number
MASL-011023
MASL-011023-TR0500
MASL-011023-001SMB
Package
Bulk Packaging
500 piece reel
Sample Board
Rev. V2
Functional Block Diagram
N/C N/C ANT N/C N/C N/C N/C N/C
32
30
N/C ₁
25
24 ^A1
LOAD 2
N/C
LOAD 3
N/C
Switch
22 ^G1
N/C
N/C
20 ^B2
N/C
N/C
N/C
N/C ₈
Limiter
N/C
17 ^N/C
9
16
N/C N/C N/C N/C N/C N/C N/C RX
Pin Configuration
Pin No.
1
2
3
4 - 15
16
17 - 19
20
21
22
23
24
25 - 29
30
31, 32
33¹
Pin Name
Description
N/C
No Connection
LOAD
LOAD
T_X Port
T_X Port
N/C
No Connection
R_X
R_X Port
N/C
No Connection
B2
Bias
N/C
No Connection
G1
Ground
N/C
No Connection
A1
No Connection
N/C
No Connection
ANT
Antenna
N/C
No Connection
Ground Paddle
1. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]