MAPDCT0030_V5 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – 2 Way Power Divider

MAPDCT0030
2 Way 0º Power Divider
5 to 1000 MHz
Features
• Surface mount
• 2 Way 0 degree.
• 260°C reflow compatible
• RoHS* compliant
• Available on tape and reel.
Description
M/A-Com Technology Solutions MAPDCT0030 is a
2 way 0 degree RF power divider in a low cost, sur-
face mount package. Ideally suited for high volume
CATV & VSAT applications. Two 0603 1pF capaci-
tors and one 200Ω resistor are required with this
part.
Schematic
Case style:
0.181(4.60)
Rev. V5
0.141
(3.60±0.4)
Pin configuration
Pin no.
1
2
3
4
5
6
Function
Output 1
External 1pF Capacitor to ground
Ground
Input
External 1pF Capacitor to ground
Output 2
Unless otherwise stated dimensions are in inches [mm]
Tolerance: .xx ± .02, .xxx ± .010
Note: Pin’s 2 and 5 need to be connected together on the PCB
as shown above.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.