MAPDCC0019_15 Datasheet, PDF (1/5 Pages) M/A-COM Technology Solutions, Inc. – Low Cost Six-Way Power Divider

MAPDCC0019
Low Cost Six-Way Power Divider
824 – 960 MHz
Rev. V2
Features
 Small Size, Low Profile
 Superior Repeatability (Lot-to-Lot Variation)
 Typical Isolation 25 dB
 Typical Insertion Loss 0.8 dB
 Low Cost
 Lead-Free SOIC-16 Package
 100% Matte Tin Plating over Copper
 Halogen-Free “Green” Mold Compound
 260°C Reflow Compatible
 RoHS* Compliant Version of DS56-0005
Description
M/A-COM’s MAPDCC0019 is an IC-based mono-
lithic power divider in a low cost SOIC-16 plastic
package. The 6-way power divider is ideally suited
for applications where PCB real estate is at a pre-
mium and part count reduction and cost are critical.
Typical applications include base station switching
networks and other cellular equipment, including
subscriber units. Available in Tape and Reel.
The MAPDCC0019 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and reli-
ability.
Ordering Information
Part Number
MAPDCC0019
MAPDCC0019-TR
MAPDCC0019-TB
Package
Bulk Packaging
1000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
Functional Block Diagram¹
1. All unused pins must be RF and DC grounded.
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
Function
GND
RF 3 (OUT)
GND
RF 2 (OUT)
GND
RF 1 (OUT)
GND
RF IN
Pin No.
9
10
11
12
13
14
15
16
Function
GND
GND
RF 6 (OUT)
GND
RF 5 (OUT)
GND
RF 4 (OUT)
GND
1 ^{* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.}
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support