MAPD-008762-ES0001 Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series 2-way 90˚ Power Divider

RoHS
Compliant
E-Series 2-way 90˚ Power Divider
120 – 160 MHz
Features
• 2-way
• 90 Degree
• Surface Mount
• Tape and reel packaging available
• 260°C Reflow Compatible
• RoHS* compliant version of the MAPDES0001
Description
M/A-COM’s MAPD-008762-ES0001 is a RoHS Com-
pliant 2-way 90˚ power divider in a low cost, surface
mount package. Ideally suited for high volume cellular,
wireless applications.
The MAPD-008762-ES0001 is available in a SM-87
surface mount package and is designed to be utilized
in both RoHS and standard reflow profiles. Parts are
packaged in tape & reel.
MAPD-008762-ES0001
V1
SM - 87 Package
Ordering Information
Part Number
MAPD-008762-ES0001
Package
Tape and Reel (900 piece Reel)
Absolute Maximum Ratings ^1,2
Parameter
Impedance
RF Power
Internal Load Dissipation
Operating Temperature
Storage Temperature
Absolute Maximum
50 Ohms nominal
1 Watt
0.125 Watt
-40°C to +85°C
-55°C to +125°C
Pin Configuration
Pin No.
Input
Port 1
Port 2
External 50 Ohms
Not Connected
Function
1
3
6
4
2,5
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based
on measured results and target specifications. Commitment to produce in volume is not guaranteed.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.