MAMX-090950-1277LT Datasheet, PDF (1/4 Pages) Tyco Electronics – Silicon Double Balanced HMIC Mixer 850 - 1050 MHz

MAMX-090950-1277LT
Silicon Double Balanced HMIC Mixer
850 - 1050 MHz
Features
• +21 dBm Typical Input IP3
• 8.3 dB Typical Conversion Loss
• +5 to +10 dBm LO Drive
• Fully Balanced Passive Mixer
• Low Cost Miniature Plastic MLP Package
• Lead Free (RoHS* Compliant) with 260°C Re-
flow Capability
• 100% Matte Tin Plating
Description
M/A-COM’s MAMX-090950-1277LT is a 850 - 1050
MHz silicon monolithic double balanced mixer in a
low cost miniature surface mount MLP 3 mm, 16
lead plastic package. The die uses M/A-COM’s
unique HMIC silicon/glass process to realize low
loss passive elements while retaining the advan-
tages of medium barrier silicon Schottky barrier
diodes.
Applications
These mixers are well suited for GSM and CDMA
Cellular basestation applications where small size
and high performance are required. Typical Appli-
cations include frequency conversion, modulation,
and demodulation in wireless receivers and trans-
mitters.
Ordering Information
Model No.
MAMX-090950-1277LT
Package
Tape and Reel
Absolute Maximum Ratings ^1,2
Parameter
Maximum Rating
Operating Temperature
-65°C to +125°C
Storage Temperature
-65°C to 150°C
Incident LO Power
+20 dBm
Incident RF Power
+20 dBm
Soldering Temperature
+260°C max.
1. Exceeding these limits may cause permanent damage.
2. Please refer to application note M538 for surface mounting
instructions
Rev. V2
MLP 3mm Package - Circuit Side
PIN Configuration ³
PIN
Function
PIN
1
N/C
9
2
N/C
10
3
LO
11
4
N/C
12
5
N/C
13
6
N/C
14
7
N/C
15
8
N/C
16
3. Center area is ground
Schematic
IF
RF
Function
N/C
RF
N/C
N/C
N/C
IF
N/C
N/C
LO
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.