MAMX-008786-ES0120_V2 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – E-Series Surface Mount Mixer

MAMX-008786-ES0120
E-Series Surface Mount Mixer
880 – 915 MHz
Features
• LO Power +17 dBm
• Up to +13 dBm RF
• Surface Mount
• RoHS* Compliant version of the EMRS-6HX1
• Tape and reel packaging
Description
M/A-COM Technology Solutions MAMX-008786-
ES0120 is a RoHS compliant device that is equiva-
lent to the EMRS-6HX1 mixer.
This device is a Low Cost, High Drive, surface
mount Mixer designed for use in high volume
wireless applications.
The MAMX-008786-ES0120 mixer is offered in a
surface mount package and is designed to be util-
ized in both standard reflow and high temperature
soldering reflow profiles.
Rev. V2
Component Dimensions
123
4.85mm
5.50mm
6.35mm
65 4
8.20mm
1.50mm
1.50mm
2.26mm
7.87mm
1.50mm
2.54mm
Recommended
PCB Layout
Dimensions in mm, Tolerance: .xx ± 0.3 , unless otherwise
stated. Drawing not to scale.
Pin Configuration
Pin No.
1
2
3
4
5
6
Function
LO
Ground
Ground
RF
IF
Ground
Recommended Maximum Ratings ^1,2
Parameter
Max RF Power
Peak IF Current
Pin Temperature
(10 seconds)
Operating Temperature
Storage Temperature
Value
50 mW
40 mA
260° C
-10°C to +85°C
-55°C to +125°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM Technology Solutions does not recommend sus-
tained operation near these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.