MAMX-008782-ES0118_V3 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – E-Series Surface Mount Mixer

MAMX-008782-ES0118
E-Series Surface Mount Mixer
925 – 960 MHz & 1805 – 1880
Features
• LO Power +7 dBm
• Up to +7 dBm RF
• Surface Mount
• RoHS* Compliant version of the EMRS-6X1
• Tape and reel packaging
Description
M/A-COM Technology Solutions part number
MAMX-008782-ES0118 is a RoHS compliant device
that is equivalent to the EMRS-6X1 mixer. This de-
vice is a Low Cost, Low Drive, surface mount Mixer
designed for use in high volume wireless
applications.
The MAMX-008782-ES0118 mixer is offered in a
surface mount package and is designed to be util-
ized in both standard reflow and high temperature
soldering reflow profiles.
Rev. V3
Component Dimensions
123
4.85mm
5.50mm
6.35mm
65 4
8.20mm
1.50mm
1.50mm
2.26mm
7.87mm
1.50mm
2.54mm
Recommended
PCB Layout
Dimensions in mm, Tolerance: .xx ± 0.3 , unless otherwise
stated. Drawing not to scale.
Pin Configuration
Pin No.
1
2
3
4
5
6
Function
LO I/P
Ground
Ground
RF O/P
IF I/P
Ground
Recommended Maximum Ratings ^1,2
Parameter
Value
Max RF Power
50 mW
Peak IF Current
40 mA
Pin Temperature
(10 sec)
260° C
Operating Temperature
-55°C to +100°C
Storage Temperature
-55°C to +125°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM Technology Solutions does not recommend sus-
tained operation near these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.