MAMX-007238-CM25MH_V5 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – E-Series Surface Mount Mixer

MAMX-007238-CM25MH
E-Series Surface Mount Mixer
5-2500 MHz
Features
• LO Power +13 dBm
• Up to +9 dBm RF
• Surface Mount
• Tape and reel packaging
• 260°C Reflow Compatible
• RoHS* compliant version of the ELCM-25MH
Description
M/A-COM Technology Solutions part number
MAMX-007238-CM25MH is a RoHS Compliant Low
Cost, Broadband, high performance Double Bal-
anced Mixer designed for use in high volume wire-
less applications. The device has been optimized by
careful selection of the Schottky Diode and Balun
Transformer for excellent performance.
The MAMX-007238-CM25MH is in a surface mount
package and is designed to be utilized in both stan-
dard reflow and high temperature soldering reflow
profiles.
Rev. V5
Component Dimensions
123
4.85mm
5.50mm
6.35mm
65 4
8.20mm
1.50mm
1.50mm
2.26mm
7.87mm
1.50mm
2.54mm
Recommended
PCB Layout
Dimensions in mm, Tolerance: .xx ± 0.3 , unless otherwise
stated. Drawing not to scale.
Pin Configuration
Pin No.
1
2
3
4
5
6
Function
LO
Ground
Ground
RF
IF
Ground
Recommended Maximum Ratings ^1,2
Parameter
RF Power
Peak IF Current
Operating Temperature
Storage Temperature
Value
150 mW
40 mA
-55°C to +85°C
-65°C to +125°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM Technology Solutions does not recommend sus-
tained operation near these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.