MAMX-000950-1225MT_V3 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Silicon Doubled Balanced HMIC Mixer

MAMX-000950-1225MT
Silicon Doubled Balanced HMIC Mixer
700 - 1200 MHz
Features
 SOT-25 Low Cost Miniature Plastic Package
 7.0 dB Typical Conversion Loss
 +7 to +13 dBm LO Drive
 HMIC Patented Process
 Silicon Medium Barrier Schottky Diodes
 DC - 400 MHz IF Bandwidth
 RoHS* Compliant with 260 °C Reflow Capability
 100% Matte Tin Plating
Description and Applications
M/A-COM’s MAMX-000950-1225MT is a 700-1200 MHz
silicon monolithic double balanced mixer in a low cost
miniature surface mount SOT-25 package. The die uses
M/A-COM’s unique HMIC silicon/glass process to
achieve low loss passive elements while retaining
the advantages of medium barrier silicon Schottky
barrier diodes.
These mixers are well suited for high volume wire-
less and cellular applications where small size and
repeatability are required. Typical applications
include frequency conversion, modulation, and
demodulation in wireless receivers and transmitters.
Absolute Maximum Ratings ^1,2
Parameter
Maximum Ratings
Operating Temperature
-65 °C to +125 °C
Storage Temperature
-65 °C to +150 °C
Incident LO Power
+20 dBm
Incident RF Power
+20 dBm
Soldering Temperature
+260 °C max.
1. Exceeding these limits may cause permanent damage.
2. Please refer to application note M538 for surface mounting
instructions.
SOT-25 Package Outline
(Topview)
32 1
Rev. V3
4
5
PIN Configuration
PIN
Function
PIN
1
RF
4
2
GND
5
3
LO
Schematic
IF
RF
Function
GND
IF
LO
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.