MAFLCC0007 Datasheet, PDF (1/3 Pages) Tyco Electronics – Low Cost SMT Low Pass Filter DC - 2000 MHz

MAFLCC0007
Low Cost SMT Low Pass Filter
DC – 2000 MHz
Features
• Small Size and Low Profile
• Superior Repeatability
• Typical Insertion Loss 0.6 dB
• Typical Rejection 20 dB
• 2 Watt Power Handling
• Lead-Free SO-8 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of FL07-0002-G
Description
M/A-COM’s MAFLCC0007 is an IC-based monolithic
low pass filter in a low cost SOIC-8 plastic package.
The filter is ideally suited for applications where
small size, low cost and low loss are required.
Typical applications include base station switching
networks and portable phones where size and PCB
real estate are at a premium. Available in tape and
reel.
The MAFLCC0007 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and reli-
ability.
Functional Block Diagram
Rev. V2
Ordering Information
Part Number
MAFLCC0007
MAFLCC0007-TR
MAFLCC0007-TB
Package
Bulk Packaging
1000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
1. All unused pins must be RF and DC grounded.
2. Pins 1 and 4 are thermal ground contacts.
Pin Configuration
Pin No.
1
2
3
4
Function
GND
RF IN
GND
GND
Pin No.
5
6
7
8
Function
GND
GND
RF OUT
GND
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.