MAFLCC0003 Datasheet, PDF (1/3 Pages) Tyco Electronics – Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS

MAFLCC0003
Low Cost SMT Dual Band Diplexer
AMPS/PCS and GSM/DCS
Features
• Small Size and Low Profile
• Superior Repeatability
• Passbands 824 – 960 MHz and 1850 – 1990
MHz
• Passbands 880 – 960 MHz and 1700 – 1900
MHz
• Typical Passband Insertion Loss: 0.5 dB
• 2 Watt Power Handling
• Low Cost
• Lead-Free SOT-26 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of DP52-0005
Description
M/A-COM’s MAFLCC0003 is an IC-based Monolithic
Diplexer in a low cost SOT-26 plastic package. This
Diplexer is ideally suited for applications where small
size, low insertion loss, superior repeatability, and
low cost are required. Typical applications include
AMPS/PCS and GSM/DCS dual mode portable de-
vices.
The MAFLCC0003 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and reli-
ability.
Rev. V3
Functional Block Diagram¹
GND
6
GND
5
PCS
(IN/OUT)
4
HPF
LPF
1
AMPS
(IN/OUT)
2
GND
3
ANTENNA
1. All unused pins must be RF and DC grounded.
Ordering Information
Part Number
MAFLCC0003
MAFLCC0003-TR
MAFLCC0003-TB
Package
Bulk Packaging
1000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
Pin Configuration
Pin No.
1
2
3
Function
AMPS IN/OUT
GND
ANTENNA
Pin No.
4
5
6
Function
PCS IN/OUT
GND
GND
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.