MADR-009269-000100 Datasheet, PDF (1/8 Pages) M/A-COM Technology Solutions, Inc. – Single Driver for GaAs FET or PIN Diode Switches and Attenuators

MADR-009269-000100
Single Driver for GaAs FET or PIN Diode Switches and Attenuators
Rev. V1
Features
• High Voltage CMOS Technology
• Complementary Outputs
• Positive Voltage Control
• CMOS device using TTL input levels
• Low Power Dissipation
• Low Cost Plastic SOIC-8 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
Description
The MADR-009269-000100 is a single channel
CMOS driver used to translate TTL control inputs
into complementary gate control voltages for GaAs
FET microwave switches and attenuators. High
speed analog CMOS technology is utilized to
achieve low power dissipation at moderate to high
speeds, encompassing most microwave switching
applications. The output HIGH level is optionally 0 to
+2.0V (relative to GND) to optimize the intermodula-
tion products of FET control devices at low frequen-
cies. For driving PIN Diode circuits, the outputs are
nominally switched between +5V & -5V.
Ordering Information¹
Part Number
MADR-009269-000100
MADR-009269-000DIE
MADR-009269-0001TR
Package
Bulk Packaging
Die ²
1000 piece reel
1. Reference Application Note M513 for reel size
information.
2. Die sales are available in waffle packs in increments of 100
pieces.
Functional Schematic
Pin Configuration³
Pin No.
1
2
3
4
5
6
7
8
Function
Output A
GND
V_CC
C, Logic
V_EE
V_OPT
GND
Output B
3. The bottom of the die should be isolated for part number
MADR-009269-000DIE.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] / Fax: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.