MADR-008851-000100_15 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – PIN Diode Driver for Series / Shunt High Power Switches

MADR-008851-000100
PIN Diode Driver for Series / Shunt High Power Switches
Rev. P2
Features
• High Drive Current Capability (Up to 50 mA)
• Up to 32V Back Bias in Off State
• Single CMOS Logic Input with 10K Ohm Internal
Pull Down Resistor
• Fast Switching
• Low Current Consumption
• Land Grid Array Package for SMT Applications
• 260°C Reflow Compatible
• RoHS* Compliant
• Tape and Reel Packaging Available
Description
The MADR-008851-000100 Switch Driver is de-
signed to work with M/A-COM Technology Solutions
line of series /shunt SPDT HMIC switches which op-
erate in the power range of approximately 5 to 50W
CW. It is capable to provide forward bias currents up
to 50 mA for each diode in the series/shunt switch,
with back bias voltage configurable from 12V to 32
V. It is packaged in a Land Grid Array surface mount
package and is available in tape and reel packaging
for high volume applications.
Sample boards are available with M/A-COM Tech
50W switch MASW-000834-13560T.
Ordering Information ¹
Part Number
Package
MADR-008851-000100
Bulk Packaging
MADR-008851-0001TR
300 piece Reel
MADR-008851-0001TB
Sample Board with Driver &
MASW-000834-13560T Switch
1. Reference Application Note M513 for reel size information.
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
Pin Name
VCC
GND
C1 (Logic)
GND
VDD
GND
GND
GND
GND
TX Drive
GND
SH1
Pin No.
13
14
15
16
17
18
19
20
21
22
23
-
Pin Name
GND
SH2
GND
RX Drive
GND
GND
GND
GND
GND
GND
GND
-
Handling Procedures
Please observe the following precautions to avoid
damage:
Solder & Assembly Cleaning
Driver is not approved for aqueous washing. No-
clean solder is recommended
Static Sensitivity
Silicon Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
* Restrictions on Hazardous Substances, European Union Directive
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: [phone]
• China Tel: [phone]
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.