MADP-011029-14150T Datasheet, PDF (1/9 Pages) M/A-COM Technology Solutions, Inc. – High Power PIN Diode

MADP-011029-14150T
High Power PIN Diode
50 MHz - 12 GHz
Features
• 3 Terminal LPF Broadband Shunt Structure
• 50 MHz - 12 GHz Broadband Frequency
• >100 W Peak Power Handling
• < 0.1 dB Shunt Insertion Loss
• > 25 dB Shunt Isolation
• < 20°C/W Thermal Resistance
• Lead-Free 1.5 x 1.2 mm 6-lead DFN Package
• RoHS* Compliant and 260^oC Reflow
Description
The MADP-011029 is a lead-free 1.5 x 1.2 mm DFN
surface mount plastic packaged that provides both
low and high signal frequency operation from
50 MHz to 12 GHz. The higher breakdown voltage
and lower thermal resistance of the PIN diode
provides peak power handling in excess of 100 W.
This device is ideally suitable for usage in higher
incident power switches, phase shifters, attenuators,
and limiter microwave circuits over a broad
frequency where higher performance surface mount
diode assemblies are required.
Ordering Information^1,2
Part Number
Package
MADP-011029-14150T
3000 piece reel
MADP-011029-000SMB
Sample board
1. Reference Application Note M513 for reel size information.
2. All RF Sample boards include 5 loose parts.
Functional Schematic
Rev. V1
Pin Configuration³
Pin No.
1
2
3
4
5
6
7
Pin Name
RF_IN
GND
GND
GND
GND
RF_OUT
Paddle⁴
Description
RF Input
Ground
Ground
Ground
Ground
RF Output
Ground
3. M/A-COM Technology Solutions recommends connecting
unused package pins to ground.
4. The exposed pad centered on the package bottom must be
connected to RF, DC, and thermal ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]