MADP-007417-10720T_15 Datasheet, PDF (1/5 Pages) M/A-COM Technology Solutions, Inc. – SMQ HIPAX PIN Diode

MADP-007417-10720T
SMQ HIPAX PIN Diode
Features
• RoHS Compliant
• Rectangular MELF SMQ Ceramic Package
• Low Rs for Lower Series Loss
• Long τ_L for Low Intermodulation Distortion
• Low Cj for High Series Isolation
• High Average Incident Power Handling
Capability
V2
1072
Description and Applications
The MADP-007417-10720T is a surface mountable
PIN diode in a Metal Electrode Leadless Faced
(MELF) package. The device incorporates M/A-COM
Technology Solutions time proven HIPAX technology
to produce a low inductance ceramic package with no
ribbons or whisker wires. Incorporated in the package
is a fully passivated PIN diode chip that is full face
bonded on both the cathode and anode to maximize
surface area for low electrical and thermal resistance.
The MADP-007417-10720T has been comprehen-
sively characterized both electrically and mechanically
to ensure repeatable and predictable performance.
The diode is well suited for use in low loss, low distor-
tion, and high power switching circuits. The low ther-
mal resistance of this device provides excellent high
average performance at RF power incident levels up to
200 watts CW. This device is designed to meet the
most rigorous electrical and mechanical requirements.
Designed for Automated Assembly
SMQ HIPAX PIN diodes are designed for high
volume tape and reel assembly. The rectangular
package design provides for a highly efficient means
for automatic pick and place assembly. The parallel
flat surfaces are suitable for key jaw or
vacuum pickup techniques. All solderable surfaces
are tin plated and compatible with reflow and vapor
phase soldering methods.
Absolute Maximum Ratings¹ @ +25°C
Parameter
Absolute Maximum
Operating Temperature
-65°C to +125°C
Storage Temperature
-65°C to +150°C
Diode Junction Temperature +175°C Continuous
Diode Mounting Temperature +265 °C for 10 seconds
RF C.W. Incident Power
+53dBm C.W.
Forward D.C. Current
+150mA
Reverse D.C. Voltage @ -10 uA
-1000V
1. Exceeding these limits may cause permanent damage.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.