MADP-000504-10720T_15 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – Non Magnetic MELF PIN Diode

MADP-000504-10720T
Non Magnetic MELF PIN Diode
Features
• High Power Handling
• Low Loss / Low Distortion
• Leadless Low Inductance MELF Package
• Non-Magnetic
• Surface Mountable
• RoHS Compliant
• MSL 1
V1
Package Style 1072
Dot Denotes Cathode
Description
M/A-COM Technology Solutions product line of
MELF, PIN diodes, encompass a comprehensive
range of electrical characteristics. The chip used in
the MADP-000504-10720T is manufactured using
a unique, CERMACHIP, passivation process which
provides for a hard glass encapsulation that
protects and hermetically seals the active area of
the chip. This packaged, CERMACHIP, PIN diode
is ideally suited for use in applications where high
RF and DC voltages are present.
The chip is enclosed in a rugged, ceramic, Metal
Electrode Leadless Faced (MELF), surface mount
package that is full face bonded to refractory metal
plugs on both the anode and cathode. The result is
a low loss PIN diode with low thermal resistance
due to its symmetrical thermal paths. MELF PIN
diodes are designed specifically for high volume
tape and reel assembly. Their user friendly design
provides for extremely easy, automatic, pick and
place, indexing and assembly. All solderable
surfaces are tin plated and are compatible with all
industry standard reflow and vapor phase soldering
processes.
Applications
The MADP-000504-10720T MELF is well suited for
use in low loss, low distortion, UHF and VHF high
power switching circuits. It is specifically designed to
operate in high magnetic fields and to tune or protect
RF coils in MRI circuits. This device is designed to
meet the most demanding electrical and mechanical
environments.
Absolute Maximum Ratings @ 25°C
Parameter
Forward Voltage^1,2
Reverse Voltage^1,2
Operating Temperature
Storage Temperature
Mounting Temperature
Absolute Maximum
1.0 V
500V
-65°C to +175°C
-65°C to +200°C
+260°C for 30 seconds
1. Exceeding these limits may cause permanent damage
to the device.
2. Values will de-rate linearly over temperature.
Ordering Information
Part Number
Packaging Quantity
MADP-000504-10720T Tape and reel 1500 pcs
Tape and reel information can be found in Application
Note M513 on the M/A-COM website
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] / Fax: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.