MADP-000404-10720T Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Non Magnetic MELF PIN Diode

MADP-000404-10720T
Non Magnetic MELF PIN Diode
VV12
Features
♦ Non– Magnetic MELF Ceramic Package
♦ Hermetically Sealed
♦ Low Rs for Low Series Loss
♦ Low C_j for High Series Isolation
♦ High Average Incident Power Handling
♦ RoHS Compliant
1072
Description
The MADP-000404-10720T is a non-magnetic
surface mount PIN diode in a Metal Electrode
Leadless Faced (MELF) package. The device
incorporates M/A-COM Technology Solutions time
proven HIPAX technology to produce a low
inductance ceramic package with no ribbons or
whisker wires. The diode construction includes a
hard glass passivated, CERMACHIP™ that is full
face bonded on both the cathode and anode to
maximize surface area for the lowest possible
electrical and thermal resistance. This device has
been comprehensively characterized electrically
and mechanically to ensure repeatable and
predictable performance.
Applications
The MADP-000404-10720T is well suited for use
in low loss, low distortion high power switching
circuits in high magnetic field environments from
HF through UHF frequencies. The low thermal
resistance of this device provides excellent
performance at high, incident RF power levels.
This device is designed to meet the most rigorous
electrical and mechanical requirements of MRI
testing environments
Designed for Automated Assembly
MELF PIN diodes are designed for high volume tape
and reel assembly. The rectangular package design
provides for highly efficient automatic pick and place
assembly techniques. The parallel flat surfaces are
suitable for key jaw or vacuum pickup. All solderable
surfaces are tin plated and compatible with all oven
reflow and vapor phase soldering methods.
Absolute Maximum Ratings¹ @ 25°C
Parameter
Absolute Maximum
Operating Temperature
-65 °C to +125°C
Storage Temperature
-65 °C to +150°C
Diode Junction Temperature +175 °C Continuous
Diode Mounting Temperature +265°C for 10 seconds
Forward D.C. Current
+ 250 mA
Reverse D.C. Voltage @ -1µA
250V
1. Exceeding these limits may cause permanent damage.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] / Fax: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.