MADP-000234-10720_15 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – MELF PIN Diode

MADP-000234-10720T
MELF PIN Diode
RoHS Compliant
Absolute Maximum Ratings^1,2 @ 25°C
Parameter
Forward Voltage
Reverse Voltage
Operating Temperature
Storage Temperature
Mounting Temperature
Absolute Maximum
0.85 V
-500 V
-55°C to +150°C
-55°C to +175°C
+260°C for 360 seconds
1. Exceeding these limits may cause permanent damage to
the device.
2. Values will de-rate over temperature.
Handling Procedures
The following precautions should be observed to
avoid damaging these devices.
Cleanliness and Storage
These devices should be handled and stored in a
clean environment. Ends of the device are tin plated
for greater solderability. Continuous exposure to high
humidity (>80%) for extended periods may cause the
surface to oxidize. Caution should be taken when
storing devices for long periods.
ESD
These devices are susceptible to ESD and are rated
Class 1.
General Handling
Device can be handled with tweezers or vacuum
pickups and are suitable for use with automatic
pick-and-place equipment.
Case Style ODS 1072
Rev. V3
Cathode
A
B
Solderable
A
Surfaces
C
Case Style
1072
Size Inches (mm)
A (sq)
B
C
Min./Max. Min./Max. Min./Max.
0.080/0.095 0.115/0.135 0.008/0.030
(2.032/2.413) (2.921/3.429) (.203/.762)
All tolerances are ± .001” (± .025 mm).
RoHS
The MADP-000234-10720T is fully RoHS compliant
meaning it contains less than the maximum allowable
concentration of 0.1% by weight in homogenous
materials for lead, hex chrome, mercury, PBB, PBDE,
and 0.01% for cadmium.
Mounting Techniques
Solder Attach
Typical wave soldering or reflow techniques may be
used to mount M/A-COM’s SMQ packages to circuit
boards using Sn63/Pb37 alloy or RoHS compliant
solders. For more information visit the M/A-COM web-
site and read application note M538 at:http://
www.macom.com/FileMapServlet/redirect.red?
o=M538&t=0
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.